Printers provide a great way of printing, scanning and your important documents. But, a lot of users have a complaint about facing a problem with the Kodak Printer. Many customers reported that they get Kodak Printer Error Code 3802 while using the Kodak Printer. There can be several causes around to happening this error, includes printed head failure, paper jammed, ink cartridge, and ink system failure, etc. However, if you are still experiencing the same issues, then you don’t need to worry about it; as you can easily fix the issue. Here the blog will show you some easy solutions on Fix Kodak Printer Error Code 3802. Then follow the steps that are given below to quickly solve the issue.

Step to Fix Kodak Printer Error Code 3802:-

Related Post:-How to Fix Epson Printer Error Code W-41?

Step 1:- Install Printer Driver Properly

You should try to check your Kodak Printer drivers to get rid the away from the error code 3802 in Kodak Printer.  Then it’s advised that you have to install the printers’ latest drivers.  You can download the driver by goi9ng to the official site and get the crucial information given on the latest drivers. Thus, just keeping in mind the end goal to install the ideal Kodak Printer on your PC.  Once, you were done, it assures the problems associated printer as well as PC automatically will resolve.

Step 2:- Resume the Printer

From time to time, you to verify that your printer power settings. Often the error code 3802 happens in your Kodak printer, due to suddenly OFF the printer. In such a situation you essential to use the resume elective keeping in mind the end goal to settle this issue. By then while choosing this decision your printer must be off. You would need to push on the resume option basically in the wake of holding the power button. By reiterating this system 4-5 times, the counter defends decision would be changed, and the issue will be settled.

Step 3:- Upgrade Printer Firmware

To resolve the error, you need to upgrade your printer firmware to the latest version:

Step 1:- Choose Printer Firmware

  • Go to the official site, and locate and select the firmware for your printer.
  • Follow the instructions to install the firmware.

Step 2: Printer firmware is already up-to-date

In case, your printer firmware is already up-to-date, then follow the below steps.

  • Press the “On/Off” button on your printer control panel.
  • Disconnect the power cable from the back of the printer.
  • Wait 10 seconds to allow the printer to reset.
  • Then connect the power cable to the printer.
  • Turn the printer on by pressing the On/Off button.

Then cheek the error is resolved. If not then go to the next step.

Step 4:- Verify Printhead

If the error continues:

  • Open the printer access door.
  • Remove and install the printhead.
  • Close the printer access door.
  • Follow the on-screen instructions to calibrate the printhead.

NOTE: If you are not provoked to calibrate the printhead, turn off the printer, wait 10 seconds, then turn on the printer.

I hope the error is resolved.

But in case, if the error continues, then contact with our Kodak Printer support team to take online help out in this situation.

Dial Kodak Printer Customer Support Number for Online Assistance:-

You can hassle free contact at Kodak Printer Support Number to immediately make a connection with Kodak Printer Customer Support Number team, who are available 24×7/365 days to your assistance.  The well-experienced and certified technicians are smart enough in dealing any kind of Kodak Printer technical issues or errors. It assures you will grab the accurate, hasty and finest solutions to fix this Kodak Printer technical issues. Hence call us now for further help.