When Epson Printer users have reported an error code 000031 while functioning with their Epson printer it’s time to get machine repaired. The error code 000031 generally appears when a fault occurs in the scanner area of your printer when the scan mechanism gets jammed or another internal hardware fault.  Error with printer machine can also appears when you are trying to remove the packing materials from underneath the scanner and met with accident when trying to install but it won’t proceed with the installation procedure. So there might be the reasons due to which the error is happening. Therefore you can now competently get to Fix Epson Printer Error Code 000031, with mentioned easy solutions along with the steps of blogs resolving for your ease.

Solutions to Fix Epson Printer Error Code 000031

Solution 1:- Install the Cartridges Again

You should need to take out the ink cartridges in your Epson printer and find out that your Epson Printer is not sensing them as possible packing material as it was not supposed to be there until after the initial setup is complete when it tells you to install the cartridges and use the device.

Turn it ON and don not do anything while it tells you to.

Solution 2:- Reset Epson By Software Help

Step 1: When you are trying to reset your Epson printer by software help like WIC Software.

Step 2: Now connect your computer to the Internet.

Step 3: Remove the entire print job as it is the best to turn the printer OFF and ON again, wait for the printer to be in 2 red lights flashing alternately error status.

Step 4: Unzip ‘Ink Pad Reset’ Software and place it on your computer desktop.

Step 5: Open the program named Waste_Ink_Pad.exe

Step 6: Now hitting on the ‘Read Waste Counters’ to verify the status of the waste ink counter and also comparing the situation before and after the counter using WIC Software.

Step 7: Finally have a check on the error code 000031 if it is resolved. If not, then go to the next solution.

Solution 3:- Check the Paper Piece

A paper jam can often cause the error message to occur. It is time you should inspect the inside of Epson Printer device. In order to make sure that there is not any of a small piece of paper stuck somewhere start using your machine and find if any interruption is still there.

Solution 4:- Turn off the Printer

Step 1: Turn off your Epson Printer.

Step 2: Now press on “B / W Copy”, “Color Copy” and “Stop / Reset” button at the same time.

Step 3: Turn on the printer, when “init.EEPROM” appears, and then release all buttons.

Step 4: When the message “push power sw” has appeared on the screen.

Step 5: Now hit on “Copy Color” once.

Step 6: Turn off the printer sometimes.

Step 7: Switch ON the device again.

In case all above mentioned solutions didn’t help you to solve your Epson Printer Error Code 000031, then you must take the help of an expert help and avail the best of troubleshooting steps to fix it instantly and enjoy the printer service.

Dial Epson Printer Customer Support Phone Number to Get 24×7 Online Help

You can call at Epson Customer Care Toll-free Number +1-888-866-2207 which you dial any hour of day and night as it is accessible 24×7 and 365 days. Via call you will connect with our team of well-experienced and certified technicians, who are well capable in dealing any kind of Epson Printer technical issues or errors. Thus, you will get the reliable and perfect solution to your Epson Printer queries in a very short span of time. Feel free to connect anytime as tech experts are available around-the-clock to assist you with proper solutions.