Ricoh Printer Error Code SC 552 is a typical fusing thermistor error. Avail instant solution via Ricoh Printer Tech Support Number 1-800-610-6962 to deal with this error. You can easily fix Ricoh SC 552 Error Code using simple effective solutions.

Ricoh Printer Error Code SC 552

The error code in general represents fusing error inside the thermistor. When the fusing lamp is not properly connected, you can get this error. There are many other possibilities for this error. Several other thermistor issues can cause this error. You need to check each and troubleshoot them separately. You can also encounter this error is the thermistor is gone bad or bent somehow. When the thermistor position is not correct, this error code can pop up suddenly. Sometimes it can get clogged with toner and shows you this error.

Effective Solutions to Troubleshoot Ricoh SC 552 Error Code:

The proper troubleshooting solution for this error is not actually known. You need to multiple components to get rid of this error. Here we have discussed such small troubleshooting solutions to rectify this error. You can perform these small solutions separately to dismiss this error in lesser span of time. You can also visit our Printer Tech Customer Care Support to gain more knowledge about this error.

Go through the down mentioned solutions to make yourself free from such troubling error. you can also contact us for reliable professional help.

Solution1: Removing Paper Jam

It is possible that the thermistor is somehow mechanically damaged due to a paper jam. Look for a paper jam inside the Ricoh device. To do so, you need to open up your printing device and remove all sort of small piece of papers that are being struck inside the printer. Also free the printing rollers from debris piece of papers to get rid of this issue easily.

Solution2: Reset Ricoh Printer

If the error code still persists, resetting your printer will help you to dismiss this error. Reset your printer using tech mode and observe the 1-106 temp settings.

While the machine is warming up, you need to go through the temp settings carefully. Sometimes, the thermistor needs a heat lamp.

Solution3: Cleaning of the Build-up Toner

If there is a toner build-up on the hot roller thermistor, clean it properly to get rid of this error effectively.

Dial Printer Tech Customer Service Number for Personalized Help:

resolve common printer problems

If you are still facing this error, connect with immediate basis with Ricoh Printer Customer Service Number. We are here to help you to make all your printing glitches disappear within a minute. With a team of professional engineers, we make sure that you are having satisfactory results to resolve your issue. If you are in much trouble and cannot get your printer back to work, dial the toll free number as early possible.