"Printer in Error State" on Windows 10? Here's How to Fix It (and When to Call HP)
Few error messages are as useless as the one Windows 10 throws at you: "Printer is in an error state." No error code, no explanation, no hint about whether it's your PC or the printer. Just a red X and rising blood pressure.
Here's the good news: in most cases, this is a Windows-side problem — a stuck spooler, an outdated driver, or a connection hiccup — and you can fix it yourself in about 10 minutes. Here's the full playbook, plus the HP support number if your printer refuses to cooperate.
First: Rule Out the Obvious Stuff
Before diving into Windows settings, do the 60-second physical check:
- Power cycle the printer. Turn it off, unplug it for 30 seconds, plug it back in. Seriously — this clears the error state more often than any software fix.
- Check the printer's display panel. Paper jam? Low ink warning? Open lid? The printer itself often knows what's wrong even when Windows doesn't.
- Check the cable or Wi-Fi. If you're on USB, try a different port (avoid hubs). If you're wireless, confirm the printer and PC are on the same Wi-Fi network — a printer that jumped to a guest network will show as "in error state" every time.
If the printer's display is showing a specific error code (like 0x6100004a or E3), that's a hardware-side issue and you'll want to look up that specific code. But if the printer looks happy and Windows is the one complaining, keep reading.
Fix #1: Restart the Print Spooler
The Windows print spooler is the service that manages print jobs, and it jams up constantly. This is the single most common fix for the error state message:
- Press Windows + R, type
services.msc, and hit Enter. - Scroll down to Print Spooler.
- Right-click and select Restart.
If it won't restart, clear the queue manually: navigate to C:\Windows\System32\spool\PRINTERS in File Explorer, delete everything in that folder, then restart the spooler service again.
Fix #2: Run the HP Print and Scan Doctor
HP actually makes a free diagnostic tool for exactly this situation, and it's surprisingly effective:
- Download the HP Print and Scan Doctor from HP's official support site (hp.com/support).
- Run it and select your printer from the list.
- Click Fix Printing and let it do its thing.
The tool automatically checks driver status, spooler health, and connectivity, and it fixes most issues without you touching a thing.
Fix #3: Update or Reinstall the Driver
Windows 10 sometimes installs a generic driver that doesn't play nice with HP printers, especially after a Windows Update. Here's the clean fix:
- Press Windows + I → Devices → Printers & scanners.
- Click your HP printer → Remove device.
- Go to HP's support site, enter your printer model, and download the latest full-feature driver for Windows 10.
- Run the installer and reconnect the printer when prompted.
If your printer is older and HP no longer lists a Windows 10 driver, the built-in Windows driver usually works — just re-add the printer via Settings → Devices → Printers & scanners → Add printer and let Windows find it.
Fix #4: Set the Printer as Default
Windows sometimes routes jobs to a phantom or offline printer, triggering the error state message. Go to Settings → Devices → Printers & scanners, uncheck "Let Windows manage my default printer," and manually set your HP printer as the default.
When to Call HP Support
If you've tried all four fixes and Windows still reports an error state, the problem is likely hardware — a failing printhead, a logic board issue, or a firmware fault. That's when it's time to call HP directly:
HP Consumer Support (US): 1-800-474-6836
Support hours are typically 8 AM – 9 PM ET, Monday through Friday, with some weekend availability. Have your serial number and model number ready — you can find the serial on a sticker inside the ink door or on the back of the printer.
One warning: if you search for HP's number on a search engine, watch out for scam support lines that pay to rank above HP's real listing. Only call numbers listed on hp.com. If anyone asks for remote access to your PC and a fee to "unlock" your printer, hang up — that's a scam, full stop.
The Bottom Line
Nine times out of ten, "printer in error state" on Windows 10 is a spooler or driver issue you can fix yourself in minutes. Restart the spooler, run the HP Print and Scan Doctor, and reinstall the driver if needed. And if the printer itself is the problem, HP's US support line at 1-800-474-6836 will get you a warranty repair or replacement — no runaround required.